HEKA EPC800 USB Patch Clamp Amplifier

HEKA EPC800 USB Patch Clamp Amplifier


  • Telegraphing outputs for Gain, Bandwidth, Mode & C-Slow.
  • Automatic Vp-Offset, C-Fast & C-Slow compensation with the simple push of a button.
  • Improved current monitor filters.
  • USB 2.0 communication for software control of all amplifier functions.
  • Low Frequency Voltage Clamp Mode (LFVC).



For any researcher who desires manual user control through knobs and dials, while at the same time, longs for some degree of computer communication and automatic control, HEKA is excited to release the HEKA EPC800 USB Patch Clamp Amplifier which is available here at Digitimer.

This amplifier is truly a unique hybrid patch-clamp amplifier with its design and feature-set primarily based upon the manually controlled EPC 8. The HEKA EPC800 USB Patch Clamp Amplifier can be controlled with any data acquisition interface and can be supported, not only by HEKA software, but also with third-party data acquisition programs.

Operating Modes of the EPC 800 USB

The HEKA EPC800 USB can be operated in three modes:

  • Telegraphing Local
  • Local
  • Remote

The decision of which mode to use not only depends upon user preference of whether or not to have the functionality to turn knobs and switches, but also upon what data acquisition interface and software the EPC 800 USB is used with.

Telegraphing Local
Rear panel telegraphing outputs for Gain, Filter Bandwidth, Amplifier Mode and C-Slow allows third-party acquisition software (e.g. IGOR, Labview, pCLAMP) to read the status of these amplifier settings while recording data. Manual control by use of the knobs and switches on the front panel.

Manual control by use of the knobs and switches on the front panel. C-Fast, C-Slow and Vp-Offset compensation can be performed manually or automatically with the push of a button. The amplifier can be used with any HEKA data acquisition interface (ITC-18, ITC-1600, LIH 8+8). Acquisition software possibilities include HEKA’s PATCHMASTER, CHARTMASTER and EPCMASTER.

Full support of all amplifier functions by HEKA’s PATCHMASTER acquisition software.
USB 2.0 communication. Please note that this is a full speed (12 Mbit/second) connection. Front panel knobs and switches of the amplifier are inactive, with the exception of the LCD multi-position switch. Can be used with HEKA’s PATCHMASTER software or EPCMASTER software in combination with custom software and appropriate interface.

To learn more about the HEKA EPC800 USB Patch Clamp Amplifier, or to discuss any of our products, you can contact us by calling 01707 328347. You can also get in touch with our experienced, helpful team by emailing us at sales@digitimer.com

Read more


Product Information

EPC800 USB Patch Clamp Amplifier




Consent to being contacted via:
By submitting, you are subject to terms and conditions of our privacy policy.