Description
DESCRIPTION
ValuTrode Cloth Electrodes provide a superior quality electrode at an economical price. Every lead wire interface is customized for each electrode to optimize current distribution for all of the various shapes and sizes. Featuring Axelgaard’s patented multi-layer MultiStick® hydrogel, ValuTrode Cloth Electrodes are known for their durability and multiple applications to the skin. Tan cloth tops are also available by special order.
Valutrode electrodes are supplied in cases of 10 packs with a total of 20 or 40 electrodes, depending on electrode dimensions (see below).
| Product Code | Shape | Dimensions | Electrodes per pack | Packs per Case | Electrodes per Case |
|---|---|---|---|---|---|
| CF3200 | Round | 1.25″ (3.2cm) | 4 | 10 | 40 |
| CF5000 | Round | 2″ (5cm) | 4 | 10 | 40 |
| CF7000 | Round | 2.75″ (7cm) | 4 | 10 | 40 |
| CF5050 | Square | 2″ x 2″ (5cm x 5cm) | 4 | 10 | 40 |
| CF4090 | Rectangle | 1.5″ x 3.5″ (4cm x 9cm) | 4 | 10 | 40 |
| CF5090 | Rectangle | 2″ x 3.5″ (5cm x 9cm) | 4 | 10 | 40 |
| CF7515 | Rectangle | 3″ x 5″ (7.5cm x 13cm) | 2 | 10 | 20 |
| CF4065 | Oval | 1.5″ x 2.5″ (4cm x 6.4cm) | 4 | 10 | 40 |
| CF5010 | Oval | 2″ x 4″ (5cm x 10cm) | 2 | 10 | 20 |
In order to connect these electrodes to our range of stimulators, please see our D185-HB4 output extension cable and DS7A-M338 Adaptors.
DOWNLOAD BROCHURE
FAQs
▼
Do the Axelgaard electrodes contain latex?
No, all Axelgaard electrodes and their packaging are latex free.
▼
Are your electrodes disposable?
Yes, when the electrodes show signs of wear and tear or are no longer comfortable to wear, they should be replaced with a new set.
▼
How are the electrodes removed from the skin?
It is important to peel the electrode from the edge and not put any strain on the lead wire.
▼
How many times can the electrodes be used?
The usable lifetime is very much dependent on the proper application, storage and care by the user. The durability is primarily dependent on the adhesiveness of the gel and this is aided by keeping the gel clean, hydrated and free of debris.
▼
How should electrodes be stored once used?
After usage, the electrode must be returned to the "ON" side of the Mylar liner and placed in the original re-sealable package. If contaminated, a small amount of debris can be removed by rubbing a drop of water on the affected area before placing back into storage.
▼
Is it necessary to clean the skin before application?
Yes, this is strongly advised as it can reduce the chance of contaminating the electrode and keep electrode resistance low. A simple wash with soap and water can remove lotions, creams, make-up and dead skin.
▼
Can electrodes be used for more than one subject?
This is not recommended for hygiene reasons. By sharing electrodes, subjects are subjected to cross-contamination.
