How should the catheters be sterilised?

This procedure is presented as guidance only and Digitimer accepts no liability for errors or omissions with this suggested procedure. It is the responsibility of the user to ensure that the cleaning and sterilisation of the catheters is carried out in a manner suitable for the intended veterinary procedure.Cardiac wires received in the Sterile Processing Department may be processed using the following protocol:
1. Flush 3 times using 70% Isopropyl Alcohol., 2. Use compressed air to gently blow out any remaining alcohol.
, 3. Wipe down the exterior of the wire 3 times using 70 % Isopropyl Alcohol.
, 4. Hang wire to dry for 48 hours in an Olympic “Sterile-Drier”, which has a HEPA filter.
, 5. After a visual inspection, attach a concentrated hydrogen peroxide Booster to the lumened end of the wire, then heat-seal into a Tyvek pouch.
, 6. Sterilise on a Short load setting using a Sterrad 100S sterilizer, which uses hydrogen peroxide and low temperature gas plasma.