| Count |
| Range: |
01 - 99
by a two digit thumbwheel switch |
| Selector: |
- Every nth
Pulse - Reset at start of Gate, then every nth
- OFF
- Once per Gate -
After the nth Pulse
|
| |
|
| Delay |
| Total
Range: |
0.1
milli-seconds - 1 second |
| Control: |
Single
turn (270o) control marked 1 - 10 with
intermediary integer panel marks |
| Accuracy: |
Single
turn: +1% at '1' and '10' marks
+5% at intermediary marks |
| Multiplier: |
x0.1,
x1, x10, x100 by 4 position rotary switch |
| Indicator: |
Amber
LED illuminates for each 'Sync' pulse as selected. |
| Sync.
Output |
TTL
output for external monitoring, see selection
below
optionally :- +15V position pulse by on-board
jumper |
| Sync.
Selection: |
Internally
selected by on-board jumper as :-
- the pulse that
triggers the delay
- the delayed
pulse
- both the
triggering and delayed pulse
|
| |
|
| Warning
Indicator |
| Error: |
Red LED
that illuminates if:
- Gate is too
short for a delayed pulse
- a Pulse is
active when a Delayed Pulse is requested
|
