Click to view your price request basket

 

WR-6 Three-axis Water Hydraulic Micromanipulator

Employing the water hydraulic system, which has a lower coefficient of expansion due to temperature changes, this model offers precise movement while minimizing drift by incorporating a 1:5 cartridge.  In addition, it integrates both coarse and fine manipulation capabilities by featuring a manual coarse manipulator for each axis.  The drum type control unit has a large handle for precise operation and high linear repeatability.  Overall, design considerations are focused on precision movement and stability over long periods of time.  The WR-6 is outstandingly versatile: when setting up, it is attached using the bar, but independent setup using a magnetic stand is also possible, as is attachment to the side of the microscope stage with an adaptor.

  • For attachment to the microscope, P-1A height adjustment plate and a suitable adaptor are required (Type A, sold separately).
  • Can be attached directly to the GJ-1 magnetic stand (sold separately).

Specification

Accessories B-8D Ball joint, H-1 Electrode Holder,CF-3 Tube fixture, P-1A Height adjustment plate, Allen wrench
Movement Range Coarse X/Y/Z 18mm
Fine X/Y/Z 2mm
Full rotation of knob 50μm, Minimum graduation 0.2μm
Dimensions/Weight Control Unit W115　ｘ　D115　ｘ　H132mm、1.6kg
Drive W110　ｘ　D60　ｘ　H140mm、0.4kg

 

[Latest News]    [Newsletter]    [Contact Us]    [Support]    [Search]   [Website Guide]    [Privacy]    [Company Information]

© 2008 Digitimer Limited - "Digitimer" and "NeuroLog" are registered Trade Marks of Digitimer Ltd.

Product Specifications are subject to change without prior notice