| LU-ASP |
Leiden
Aspirator - Cover Slip Dish fluid level setting device -
38mm height |
 |
| LU-ASP-T |
Replacement
metal Aspirator tube for LU-ASP |
|
| LU-CSD |
Leiden
Cover Slip Dish - 35mm dia. Teflon dish x 19mm optical
window x 31.50mm dia. working area x1ml approx. fluid
volume |
|
| LU-CSD-SPECIAL |
Leiden
Multi Well Cover Slip Dish - 35mm dia. Teflon dish with
two "kidney" shaped inner optical window wells
approx. 15mm L x 8mm W (max.) and one 31.5mm dia.
surrounding well |
|
| MSC-PTD |
Teflon
Glass Cover Slip Dish (35mm dia.) (9.5mm W x 19mm L
rectangular optical window, rounded at each end). Low
volume (less that 1ml), fast fluid transfer and maximum
mixing |
|
| MSC-TD |
Teflon
Glass Cover Slip Dish (35mm dia.) with removing handle.
Same specifications as LU-CSD |
|
| MI-M |
Mini
magnets for top surface of micro-incubators (LU-CB-1,
PDMI-2 or PSMI). Set of 4 |
|
| PS-CSD |
Patch
Slice Cover Slip Dish for PSMI Now,
Pack of 5 off |
|
| LU-PD |
Sleeve
of twenty 35mm Petri dishes |
|
| BSC-TH |
Magnetic
thermistor holder for LU-CB-1 |
|
| BSC-T3 |
Thermistor
(bath) for use with PDMI-2, PSMI, LU-CB1 and
TC-202A (36k ohms total) |
|
| BSC-T3A |
Thermistor
(bath) for use with LU-CPC-CEH and TC-202A |
 |
| BSC-T2 |
Old
style - Thermistor (bath) for obsolete TC-102 |
|
| BSC-T2A |
Old
style - Thermistor (bath) for use with LU-CPC-CEH and
TC-102 |
|
| PDMI-TUBE |
PDMI-2
copper cooling tube coil (shaped to conform to fin
channel) with open ends |
|
| CSMI-TUBE |
CSMI-2
copper cooling tube coil (shaped to conform to fin
channel) with open ends |
|
| LU-Cable |
Replacement
output cable to connect TC-202A temperature controller to
LU-CB1 Base unit |
|
| Micro-incubator
Microscope Adaptors
|
| PDMI-ARL |
PDMI-2/PSMI
Alignment ring for Leica microscopes - 88mm x 1.8mm. |
|
| PDMI-ARN |
PDMI-2/PSMI
Alignment ring for Nikon Diaphot (old or 300/200) TMD
stage - 4.242" x 0.071" |
|
| PDMI-ARO |
PDMI-2/PSMI
Alignment ring for Olympus IX50/70 or IMT-2 fixed stage -
4.320" x 0.071" |
|
| PDMI-ARZ |
PDMI-2/PSMI
Alignment ring for Zeiss Axiovert gliding or rotary stages
- 4.046" x 0.071" |
|
| PDMI-FPL |
PDMI-2/PSMI
Fixing Platform for Leica DAS Mikroskop DMIL and DMIRB/E
with Attachable Mechanical Stage |
|
| PDMI-FPZ |
PDMI-2/PSMI
Fixing Platform for Zeiss Axiovert with attachable
mechanical stage |
|
| LU-FPL |
LU-CB-1
Fixing Platform for Leica DAS Mikroskop DMIL and DMIRB/E
with Attachable Mechanical Stage |
|
| LU-FPZ |
LU-CB-1
Fixing Platform for Zeiss Axiovert with Attachable
Mechanical Stage, M-type Stage. |
|
| Micro-incubator
Spare Parts
|
| D-ORING-1 |
Cover
Slip Dish "O" rings replacement for LU-CSD or
MSC-TD. Set of two (1 small approx. 23.8 mm O.D. and
1 large approx. 29.80mm O.D.) |
|
| D-ORING-2 |
Cover
Slip Dish "O" rings replacement for MSC-PTD.
Set of two (1 small approx. 20.80mm and 1 large approx.
29.80mm O.D. |
|
| CS-GLASS-1 |
Glass
cover slips (#1) for LU-CSD or MSC-TD (0.13 - 0.17mm thick
x 25mm dia. x 100pcs.) |
|
| CS-GLASS-2 |
Glass
cover slips (#2) for LU-CSD or MSC-TD (0.18 - 0.25mm thick
x 25mm dia. x 100pcs.) |
|
| MI-T |
Perfusion/aspiration
Teflon tubing replacements for PDMI-2/PSMI - 2' long x
26AWG x 8pcs |
|
| LU-CPC-P |
Silicone
rubber plugs for LU-CPC or LU-CPC-CEH - set of 4 plugs |
|
| TC-CA |
Replacement
output cable to connect TC-102 to LU-CB-1 |
|
| Tissue
Slice System (BSC) Accessories |
| BSC-T2 |
Old
style - Thermistor (bath) for obsolete TC-102 |
|
| BSC-T3 |
Thermistor
(bath) for use with PDMI-2, PSMI, LU-CB1 and
TC-202A (36k ohms total) |
|
| BSC-AIR |
Aeration
element replacement |
|
| BSC-ORING |
Base
Unit replacement gasket set |
|
| BSC-HE |
Base
Unit heating element replacement |
|
| BSC-TUBE |
Base
Unit tubing set replacement |
|
| BSC-G10 |
Replacement
Haas top tissue insert (set of two) |
|
| BSC-HTC |
Replacement
Haas top plastic cover |
|
| BSC-HT-AG |
Replacement
Haas top silver ground wire |
|
| BSC-HT-I |
Replacement
Haas top insert |
|
| BSC-ZTC |
Replacement
Zbicz top plastic insert |
|
| BSC-PC-VAL |
Replacement
prechamber valve |
|
| BSC-ACC-KIT |
Base
unit, Haas & Zbicz tops accessory kit (replacement
screws, fittings & mesh) |
|
| BSC-MESH |
Haas
top, Zbicz top replacement mesh (4" x 4" x 4pcs) |
|
| TC-CB |
Replacement
output cable to connect TC102 temperature controller to
BSC-BU base unit |
|
| BSC-Cable |
Replacement
output cable to connect TC-202 temperature controller to
BSC-BU base unit. |
|
|
){kind=link}
){kind=link}
){kind=link}
){kind=link}