To enable the user to make full use of the NeuroLog System, we make available a wide range of accessories - at least some will be required for each and every system. No accessory leads or connectors are supplied with the modules of the NeuroLog System. (unless otherwise stated). Usually at least one type NL962 plug or appropriate lead is required for each module ordered.  Click on the part numbers to display images of each product.

Electrode Holders
NL04	Tungsten micro-electrode holder - 26 gauge hypodermic needle tube soldered into a drilled out 2mm pin.
NL08	Micro-electrode adaptor - 2mm pin to 0.8mm jack.  Fits commercially available electrodes as shown in the photograph.
NL101xx	Electrode chambers for glass recording pipettes.  Available with 1mm or 2mm pins, for glass of 1, 1.2, 1.5 &  2mm.  Polycabonate tube for 1.0, 1.2, 1.5 or 2mm o.d. glass.
Cables
NL951-xx	Standard single pole cables with male connectors (Lemo type F00250) on both ends; available in 5 standard lengths (15cm; 30cm; 45cm; 1m; 2m). When ordering please specify length, e.g. NL951-45cm.
NL951B-xx	Lemo to BNC cable. Available in 1m (NL951B-1m) or 2m (NL951B-2m) versions.
NL952	2m cable with male connector (F00250) at one end and tinned leads at the other.
NL953	2m cable with a Lemo type F0304 male connector one end and tinned leads at the other end (mates with the input socket on the NL103 AC-Preamplifier [superceded by NL104A] and NL107 Recorder Amplifier).
NL953K	2m cable with a Lemo type FG0B304 male connector one end and tinned leads at the other end (mates with the input socket on the NL104A AC-Preamplifier and NL108A Pressure Amplifier).
NL975	1m two way cable with tinned leads at one end and two 4mm plugs at the other (mates with NL120 Audio Amplifier output socket).
NL975S	1m two way cable with tinned leads at one end and two shrouded 2mm plugs at the other (mates with NL120S Audio Amplifier output socket).
Extension Cables
NL950	10cm (1-way) cable with male connector (Lemo type F00250) one end and a female connector (Lemo type RC00250) on the other end.
NL954	2m (4-way) extension cable for NL100A Preamplifier, first stage for NL103 AC Preamplifier [superceded], NL107 Recorder Amplifier.
NL954K	2m 4-way extension cable for NL100AK/NL104A/NL108A/NL850A.
NL955	2m 6-way extension cable for NL102 Differential DC-Preamplifier [superceded] (with split socket).
NL955K	2m 6-way extension cable for NL102 Differential DC-Preamplifier [superceded] (standard keyway).
NL956K	2m 6-way extension cable for NL102G DC-Preamplifier.
NL958	5m 9-way extension cable for connection between NL822/824 and NL820A Isolation Amplifier
Plugs (for cable mounting)
NL962	The standard Lemo NeuroLog single-pole plug.
NL963	Lemo 4-pole for NL103/NL107
NL963K	Lemo 4-pole for NL104A/NL108A
NL967K	Lemo 6-pole plug (matches NL102G).
NL968K	Lemo 2-pole plug. Mates with NL410 front panel socket.
NL969P	Lemo 9-pole insulated plug. (As used on NL820A)
NL822P/10	2mm plugs with red (NL822P/10-Red) or black (NL822P/10-Blk) insulator.  For use with NL822/824 preamplifiers or D330 MultiStim System.
NL985P	Output connector plugs (pair) for user assembly. Used with NL120S, DS2A or DS3.
NL970/10	Gold plated 1mm stacking plug with heat shrinkable sleeve. Pack of 10. For use with NL100, NL102 and NL800.
NL972/10	Gold plated 2mm plugs. Pack of 10. For use with NL100A, NL100AK and NL102G.
Sockets (for panel mounting)
NL944	Lemo 4-pole as on NL103, NL107
NL944K	Lemo 4-pole, as on NL104A, NL108A
NL964	Lemo type RA00250 socket. The standard NeuroLog front panel socket.
NL969S	9-pole insulated socket. (As used on the NL820A front panel).
Sockets (for cable mounting)
NL965	4-pole in-line socket (matches NL100A).
NL965K	4-pole in-line socket (matches NL100AK/NL850A).
NL966K	6-pole in-line socket (matches NL102GH).
Adaptors & Adaptor Cables
NL957	2m 4-way for NL100AK to NL103 or NL107.  To connect newer NL100AK to older AC preamplifier or existing NL107 Recorder Amplifier.
NL957K	2m 4-way for NL100A to NL104A. To connect older NL100 or NL100A to a NL104A.
NL960	Adaptor with a BNC plug and Lemo socket. This adaptor makes cables with BNC plugs at one end unnecessary.
NL961	'T', or more aptly 'Y' connector (Lemo type FY00250) can be used to make a branched connection at front panel socket.
NL969T	'T' connector assembly to allow two NL822/832's to be connected to a single NL820 and used as channels 1 to 4.
Accessory Kits
NL973A	NL100AK headstage accessory kit. As supplied with each NL100AK.  Kit comprises: 3x 1mm gold stacking pins with wire attached, 1x 1mm stacking pin, 1x heat shrink tubing, 1x 2mm plug, 1x "U" shaped jumper with wire attached & 1x Allen key.
NL976	NL102G headstage accessory kit. As supplied with each NL102G.
Miscellaneous Items
NL910	Blanking Panels, available in various widths.  For covering unused bays in the NL900 rack.
NL980	Edge connector extender cable. Allows access to both sides of a working module for trimmer adjustments, calibration and servicing.
NL985S	Loudspeaker for NL120S.
NL800BATT	Set of 3 batteries for older NL800.  Please note that the NEW NL800A uses 5x GP23A batteries which are available from us or good high street electrical retailers.
NL800A-BATT	Set of batteries for current NL800A (5x GP23A)
NLMAN	NeuroLog™ System Operators Manual. As supplied with each NL900.
NL50	Blank module for prototypes (painted panel, handle and PCB).

HOME > NEUROLOG SYSTEM > ACCESSORIES

[Latest News]    [Newsletter]    [Contact Us]    [Support]    [Search]   [Website Guide]    [Privacy]    [Company Information]

© 2008 Digitimer Limited - "Digitimer" and "NeuroLog" are registered Trade Marks of Digitimer Ltd.

Product Specifications are subject to change without prior notice