NL900D NeuroLog Case & Power Supply

The NL900D is the original NeuroLog System Case & Power Supply Unit.  It provides space for up to 13 single width modules.  Modules are not only powered by this unit, but wiring within the case allows signals to be passed between modules without the need for a mass of cable connections through the front panel sockets.  The NL900D measures 133mm (H), 483mm (W) and 317mm (D).

NEW NL905 Compact NeuroLog Case & Power Supply

The NEW NL905 Compact Case & Power Supply unit provides researchers with a smaller alternative to the NL900D Case.  The NL905 has space for up to 4 modules and is fully compatible with all existing NeuroLog modules. As with the NL900D, modules can communicate via internal connections, reducing the number of cables required.  The NL905 measures 130mm (H) x 164mm (W) x 271mm (D).

NeuroLog Modules

Please note that NeuroLog modules need to be installed into an NL900D or NL905 Case and Power Supply Unit to operate correctly (see below).  Modules can be selected by Grouping OR by Product Code.

Select Module by Product Code... NL61 - Isometric Force Transducer NL62 - Dual Cantilever Beam Transducer NL63 - Medium Range Single Point Load Cell NL100AK - AC Preamplifier Headstage NL100RK - Headstage & Stim. Control NL102G - DC Preamplifier NL104A - AC Preamplifier NL106 - AC/DC Amplifier NL107 - Recorder Amplifier NL108A - Pressure Amplifier NL109 - Bridge Amplifier NL108D3 - Domes for NL108T3 Transducer NL108D4 - Domes for NL108T4 Transducer NL108L2 - Lead for NL108T2 Tranducer NL108L4 - Lead for NL108T4 Transducer NL108T2 - Disposable Pressure Transducer NL108T4 - Re-useable Pressure Transducer NL120S - Audio Amplifier NL125/6 - Filter NL134/5/6 - 4-Channel Filters NL143 - 3-Channel Difference Amplifier NL144 - 4-Channel High Pass Filter NL201 - Spike Trigger NL202 - Signal Delay NL254 - Ratemeter NL301 - Pulse Generator NL304 - Period Generator NL405 - Width/Delay NL410 - Calibrator NL412 - Pulse NL501 - Logic Gate NL505 - Flip Flop NL506 - Analogue Switch NL510A - Pulse Buffer NL512 - Biphasic Buffer NL530 - 4-Channel Conditioner NL601 - Pulse Integrator NL603 - Counter NL700 - Log Display NL701 - Linear Display NL703 - EMG Integrator NL730 - Pulse Shift NL741 - Analogue Delay NL800A - Stimulus Isolator NL820A - 4-Channel Isolation Amplifier NL822 - 2-Channel AC Preamplifier NL844 - 4-Channel AC Preamplifier

NeuroLog Cables & Accessories

The NeuroLog System uses standard Lemo connectors and cables rather than BNC connectors in order to minimise the size of the modules.  Our accessories include a wide range of cables, plugs and sockets, as well as Lemo to BNC adaptors.